HP Latex 210 Printer - Manual (Page 8)

Warning labels
Label Explanation
Risk of burns. Do not touch the internal enclosures of drying
and curing modules of the printer.
Risk of burns. Do not touch the drying enclosure of the printer.
Even after opening the window latch, which disconnects the
power to the drying and curing modules, the internal surfaces
could be hot.
Electric shock hazard. The printer has two input power cords.
A voltage is still present in the drying and curing modules
after the main switch is turned off. There are no operator-
serviceable parts inside the printer. Refer servicing to qualified
service personnel. Disconnect all power cords before
servicing.
See installation instructions before connecting to the supply.
Ensure that the input voltage is within the printer's rated
voltage range. The printer requires two dedicated lines, each
protected by a branch circuit breaker according to the rating
of the wall socket outlet. Use only earthed mains outlets and
the power cords supplied by HP with the printer.
Risk of trapped hands. Do not push the roll while loading. Lift
the loading table to ease the spindle into the printer.
Risk of trapped fingers. Do not touch spindle gears while
moving.
Do not put objects on top of the printer. Do not cover the top
fans.
You are recommended to wear gloves when handling ink
cartridges, printhead cleaning cartridges and the printhead
cleaning container.
4 Chapter 1 Introduction ENWW
In
tr
od
u
ctio
n