HP Latex 210 Printer - Manual (Page 89)

Table 10-4 Margins
Side margins 5 mm (0.2 in)
Top margin (leading edge) 5 mm (0.2 in)
Bottom margin (trailing edge) 5 mm (0.2 in) (none)
100 mm (3.9 in) (small)
150 mm (5.9 in) (normal)
200 mm (7.9 in) (extra)
300 mm (11.8 in) (extra)
400 mm (15.7 in) (extra)
500 mm (19.7 in) (extra)
Physical specifications
Table 10-5 Printer physical specifications
Weight (including stand) L26500 - 202kg / L26100 - 180kg
Width 2465 mm
Depth 690 mm
Height 1370 mm
Memory specifications
Table 10-6 Memory specifications
Memory (DRAM) 512 MB
Hard disk 160 GB
Power specifications
NOTE: An electrician is required for the setup and configuration of the building electrical system used
to power the printer and also for printer installation. Make sure that your electrician is appropriately
certified according to local regulations and supplied with all the information regarding the electrical
configuration.
Your printer requires that the following electrical components be supplied and installed by the customer,
according to the National Electrotechnical Code (NEC).
Table 10-7 Single phase line specifications
Outside Japan Japan only
Number of power cords 2 2
ENWW Physical specifications 85
Prin
ter specifications