HP ProLiant Support Pack User Manual
Page 12
Deploying PSPs 12
moved and new persistent data is entered, then the persistent data is not moved to the new storage location
when you run HP SUM version 3.2.0 and later.
For more information about HP SUM utility see the HP Smart Update Manager User Guide.
After downloading the PSP self-extracting executable, perform the following steps:
1.
Go to the directory where the PSP executable is saved.
2.
Double-click the executable file and extract the PSP.
3.
Go to the directory where the extracted PSP is located and double-click hpsum.exe to start the PSP
deployment. The Source Selection screen appears.
4.
Verify that the directory path in the Directory field has the location of the smart components in the PSP
and then select Start Inventory. HP SUM performs an inventory of the available updates and verifies the
local system for the hardware and software that are installed. After the inventory and discovery
processes finish, the Select Installation Hosts screen appears.
5.
Select either the local host or one (or more) remote hosts for PSP deployment. The Select bundle filter
screen displays the PSP bundle information.
6.
Select the bundle and the appropriate filter options. For remote deployments, additional screens enable
you to update information on a per-host basis.
7.
After selecting the bundle for all hosts being updated, go to the Select Items to be Installed screen and
perform the following tasks:
a.
Select the components to be installed.
b.
If necessary, configure the components.
c.
Review failed dependencies before installation.
d.
Review the revision history of the components.
NOTE:
When running Windows Server® 2008 with the Server Core option, the Configure Now
link is not available. To configure components to be deployed:
•
Access the system as a remote host using HP SUM running on a system with a
supported Windows® operating system.
•
Configure the components before deployment.
1.
Click Install to proceed with the installation. After the installation completes, the Installation Results
screen appears.
2.
If any components did not install successfully, then complete the following steps:
a.
Review the installation logs for information about any failures.
b.
Exit HP SUM.
c.
Make the required update to the environment.
d.
Restart installation of the PSP.
For more information, see the HP Smart Update Manager User Guide