HP StoreFront Analytics for VMware Software Licenses User Manual
Page 8
3.
On the Update tab, click Browse to locate the temporary folder and select the PAK file.
4.
Click Update and then click OK to confirm the update.
The vCenter Operations Manager Administration GUI uploads the PAK file.
5.
Read and accept the EULA, and then click OK.
6.
Click OK to start the update process.
The update might take several minutes. Status information appears on the Update tab when
the update is finished.
After the installation completes, the screen will show:
Last update completed successfully
7.
Open a browser window and log in to the vCenter Operations Manager Custom GUI as the
admin user.
For example: https://xx.xx.xx.xx/vcops-custom/ (where xx.xx.xx.xx is the IP address
of the UI virtual machine).
8.
Click ADMIN > SUPPORT.
9.
Click the Info tab.
10. Verify that the build number in the Adapter Version column for the adapter matches the build
number in the PAK file that you uploaded.
You now need to configure and add the HP Storage Adapter instance. Each 3PAR array that is
configured will be of the type HP Storage Adapter Instance. It is possible to configure multiple HP
Storage Adapter adapter instances.
Configuring a Storage System (adding an adapter instance)
1.
Open a browser window and log in to the Custom GUI as an administrator.
For example: https://xx.xx.xx.xx/vcops-custom/ (where xx.xx.xx.xx is the IP address
of the UI virtual machine).
2.
Click Environment > Configuration > Adapter Instances.
3.
Below the Adapter Instances heading, click the Add Adapters button
.
4.
In the Add Adapter Instance window, add the following information.
•
Collector - select vCenter Operations Standard Server.
•
Adapter Kind - select HP Storage Adapter.
•
Adapter Instance Name - enter a friendly name for the HP 3PAR array that is being
configured.
•
Management Server Name - <server name or IP address> is the server name or
IP Address of the 3PAR StoreServ system.
•
CIM Port - is the CIM port on the array.
NOTE:
By default, the port number is 5989, but a different port may have been
configured.
•
Data Source Protocol - enter WEBM.
•
Auto Discovery - set to true.
•
License - enter the license information.
•
Report Physical Disks - By default, the selection is set to false. When it is set to false, the
information for the physical disks in the environment will not be reported.
•
Credential - Click Add and enter the credentials for the HP 3PAR array that is being
configured.
8
Installation