Acer WT 300 - Manual (Page 27)

19
When the necessary information is supplied, choose “Next” to set
your video display resolution. The screen below shows the
current setting of the video display resolution.
Note: Make sure the resolution you select is supported by you monitor,
otherwise your monitor will only display a blankscreen.
After choosing your video display resolution, choose next and
click on “Finish” to finish the setup. A dialog box will be
displayed asking you if you want to keep the selection. Choose
“OK” to keep the selection or “Cancel” to pick another one.
Wbt.book Page 19 Monday, August 2, 1999 4:07 PM