HP XP Array Manager Software - Manual (Page 26)

To reset an unregistered LUSE volume:
1. Make sure that Remote Web Console is in Modify mode.
For detailed information about Modify mode, see the HP StorageWorks XP24000/XP20000
Remote Web Console User Guide.
2. Select a CU number from the LDEV Information tree (in the upper left corner of the LUN
Expansion tab).
The LDEV Detail table (in the upper right corner of the LUN Expansion tab) displays all LDEVs
in the selected CU.
3. Select an unregistered LUSE volume (in blue bold italics) in the LDEV Detail table (in the upper
right corner of the LUN Expansion tab). Right-click the selected LUSE volume to display a
pop-up menu that includes the Reset Selected Volume command used to execute the LUSE
volume reset operation.
4. Select Reset Selected Volume.
A dialog box to confirm the LUSE volume reset operation opens.
5. Click OK on the dialog box to confirm the LUSE volume reset operation.
The setting of a selected LUSE volume that is not registered yet will be reset to the state it was in
before this LUSE volume was created, and the LUSE volumes or the LDEVs constituting the selected
LUSE volume that has just been reset will appear in the LDEV Detail table (in the upper right corner
of the LUN Expansion tab).
Figure 10 Reset LUSE Confirmation Dialog Box
The Unregistered LUSE volume list in this dialog box shows the LDEVs that constitute a LUSE volume,
but not yet registered to the storage system. Click OK to reset the LUSE volume, or click Cancel to
reset to the state before they were created.
26 Performing LUN Expansion (LUSE) Operations