HP LASERJET PRO P1102w - Manual (Page 96)

Table 8-2 Control-panel light patterns (continued)
Light status State of the product Action
The wireless light is blinking. The product is attempting to locate a
wireless network. No action is required.
The wireless light is on. The product is connected to a wireless
network. No action is required.
The wireless light is off. The product is not connected to a
network, and the wireless unit in the
product might be turned off. If the light is off, the product is not
connected to the network and the
wireless unit in the product might be off.
Press the wireless button to try
connecting to the network, or run the
Wireless Configuration utility to
configure the product. See
Use the
Wireless Configuration utility
on page 31
. To verify that the product
finds the network, print a configuration
page. The product should have an IP
address assigned to it.
For information about connecting
wirelessly to a network, see
Network
connection (wireless models only)
on page 28
.
If the product remains unable to connect
to the network, uninstall and then
reinstall the product. If the error persists,
contact a network administrator or refer
to the user manual of the wireless router
or access point.
82 Chapter 8 Solve problems ENWW