HP X1000 Network Storage Systems User Manual
Page 12
3.
On the Targets tab, select the iSCSI target that resides on your HP Storage System and then click
Details.
4.
Select the target identifier from the list, click Log off, and then click OK.
5.
On the Discovery tab, under Target Portals select the IP address that was previously designated
for iSCSI traffic between the application server and the HP Storage System and click Remove.
6.
Click Add. In the IP address or DNS name field, type the IP address (IPv4) that was enabled for
iSCSI traffic in the Automated Storage Networks dialog box and then click OK.
7.
On the Targets tab, click Log On.
8.
Check the Automatically restore this connection when the system boots check box and then click
OK.
9.
Click OK to close the iSCSI Initiator Properties dialog box.
Automated Storage Manager Overview
12