HP StorageWorks XP Remote Web Console Software User Manual
Page 177
Suspend Pair Start: Splitting (Suspending) of the data volume pair was started.
Suspend Pair Complete: Splitting (Suspending) of the data volume pair was finished.
Suspend Pair(Failure): The data volume pair was split (suspended) because of a failure.
Delete Pair Start: Release of the data volume pair was started.
Delete Pair Complete: Release of the data volume pair was finished.
Status Change by MCU(Simplex to Pending): The status of the data volume pair was changed from
Simplex to Pending because of an operation from the primary storage system.
Status Change by MCU(Simplex to Duplex): The status of the data volume pair was changed from
Simplex to Duplex because of an operation from the primary storage system.
Status Change by MCU(Pending to Duplex): The status of the data volume pair was changed from
Pending to Duplex because of an operation from the primary storage system.
Status Change by MCU(Pending to Suspend): The status of the data volume pair was changed
from Pending to Suspend because of an operation from the primary storage system.
Status Change by MCU(Duplex to Suspend): The status of the data volume pair was changed from
Duplex to Suspend because of an operation from the primary storage system.
Status Change by MCU(Duplex to Simplex): The status of the data volume pair was changed from
Duplex to Simplex because of an operation from the primary storage system.
Status Change by MCU(Pending to Simplex): The status of the data volume pair was changed from
Pending to Simplex because of an operation from the primary storage system.
Status Change by MCU(Suspend to Simplex): The status of the data volume pair was changed
from Suspend to Simplex because of an operation from the primary storage system.
Status Change by MCU(Suspend to Pending): The status of the data volume pair was changed
from Suspend to Pending because of an operation from the primary storage system.
Status Change by RCU(Suspend Pair Start): The status of the data volume pair was changed
because an operation for splitting a pair started at the secondary storage system.
Status Change by RCU(Suspend Pair Complete): The status of the data volume pair was changed
because an operation for splitting a pair finished at the secondary storage system.
Status Change by RCU(Suspend to Simplex; Delete Pair Start): An operation for releasing a
pair has been started at the secondary storage system. The status of the data volume pair will
change from Suspend to Simplex.
Status Change by RCU(Pending to Simplex; Delete Pair Start): An operation for releasing a
pair has been started at the secondary storage system. The status of the data volume pair will
change from Pending to Simplex.
Status Change by RCU(Duplex to Simplex; Delete Pair Start): An operation for releasing a pair
has been started at the secondary storage system. The status of the data volume pair will change
from Duplex to Simplex.
Status Change by RCU(Delete Pair Complete): The status of the data volume pair was changed
because an operation for releasing a pair finished at the secondary storage system.
Ready for Delta resync: A data volume pair became ready for delta resync.
Ready for Delta resync(Failure): The failure occurred with the data volume pair which was ready
for delta resync.
Status Change for Delta resync: The status of the primary data volume was changed to Hold
because of a delta resync operation.
Status Change by MCU(Simplex to Hold): The status of the data volume pair was changed from
Simplex to Hold because of an operation from the primary storage system.
Status Change by MCU(Hold to Duplex): The status of the data volume pair was changed from
Hold to Duplex because of an operation from the primary storage system.
Hitachi Universal Replicator for z/OS user guide for XP12000/XP10000 Disk Arrays and SVS 200
177