HP ProLiant DL320 G5 Server - Manual (Page 19)

Operations 19
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser board assembly.
1. Power down the server (on page 17 ).
2. Extend the server from the rack (on page 17 ).
3. Remove the access panel (on page 18 ).
4. Disconnect any internal or external cables connected to any existing expansion boards.
5. Remove the PCI riser board assembly.
Install the PCI riser board assembly
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser board assembly.
1. Install the PCI riser board assembly.