HP StorageWorks Auto Path VA Software - Manual (Page 25)

Auto Path VA Adapters Window 25
Auto Path VA Adapters Window
The Adapters window shows all host bus adapters installed on the host, even if the adapter is not
compatible (non fibre channel) with Auto Path VA. The Adapters window shows the non-compatible
adapters with an Active state but 0 (zero) for the number of paths.
The Adapters window is a view-only window and therefore has no user-configurable functions. To
open it, click the Adapters tab in the Devices window. See section ”Auto Path VA Devices Window”
on page 17 for information.
Figure 4 Auto Path VA Adapters Window