HP Surestore 64 Director Switch - Manual (Page 141)

Configure SNMP 125
Config
uring the
Di
re
ctor
Figure 43 Configure SNMP Dialog Box
8. Click Activate to activate the data and close the dialog box.
The SNMP configuration is stored in NV-RAM on the director.
9. If you are finished configuring the director, back up the configuration data. For more
information, refer to Backup and Restore Configuration on page 8.
For additional information about SNMP and MIBs, refer to hp surestore director fc-64
SNMP Support Guide (A6534-90908).