HP LaserJet M3027 Multifunction Printer series User Manual
Page 246
Advertising
3.
Remove the right side panel by sliding it towards the rear of the device until the side slides from
the device.
4.
Open the access door by pulling on the metal tab.
5.
Remove the DIMM from the antistatic package.
CAUTION
To reduce the possibility of damage caused by static electricity, always wear
an electrostatic discharge (ESD) wrist strap or touch the surface of the antistatic package
before handling DIMMs.
234
Appendix E Working with memory and print server cards
ENWW
Advertising
This manual is related to the following products: