HP Network Scanjet 5 Scanner series - Manual (Page 13)

To install on Windows 3.1, Window 3.11, or Windows
for Workgroups 3.11
1 Turn on your computer and log on to your network.
2 Start Microsoft Windows.
3 In Program Manager, from the File menu choose Run.
4 Type the path your network administrator gave you.
5 Press [Enter] or click OK. The HP Network ScanJet 5 Installation
program starts and takes a few moments to initialize.
6 Follow the instructions on the screen.
To install on Windows 95 or Windows NT 4.0
1 Turn on your computer.
2 Log on to your network.
3 Click Start and then click Run.
4 Type the path your network administrator gave you.
5 Press [Enter] or click OK. The HP Network ScanJet 5 Installation
program starts and takes a few moments to initialize.
6 Follow the instructions on the screen.
To install on Windows NT 3.51
1 Turn on your computer.
2 Log on to your network.
3 In Program Manager from the File menu, choose Run.
4 Type the path your network administrator gave you.
5 Press [Enter] or click OK. The HP Network ScanJet 5 Installation
program starts and takes a few moments to initialize.
6 Follow the instructions on the screen.
1
Getting
S
tar
ted
EN
Getting Started 13