Dimm slots, Installing a dimm – HP ProLiant SL335s G7 Server User Manual
Page 31
Advertising
Hardware options installation 31
DIMM slots
DIMM slots are identified by the numbers 1 through 6. DIMM population order is specified by the letters A
through F.
Installing a DIMM
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
To install the component:
1.
Power down the server (on page
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis ("
Removing the server from the chassis
" on page
4.
Open the DIMM slot latches.
Advertising