ATEN ACS1208 - Manual (Page 20)

ACS1208 / ACS1216 User Manual
8
6. Firmware Upgrade Reset Switch
During normal operation and while performing a fimware upgrade, this
switch should be in the normal position. If a firmware upgrade operation
does not complete successfully, slide this switch to the reset position and
perform the firmware upgrade again.
Note: Once you begin a firmware upgrade procedure, you cannot return to
the previous firmware configuration. The operation must be carried
through to a successful conclusion.
7. Console Port Section
If this is a Single Station installation, or if this is the First Station unit of a
daisy chained installation, the keyboard, monitor, and mouse plug in here.
acs1208-1216.book Page 8 Friday, April 27, 2007 3:23 PM