ATEN ACS1208 - Manual (Page 34)

ACS1208 / ACS1216 User Manual
22
OSD Main Screen
When you invoke the OSD, a screen similar to the one below appears:
Note: 1. The diagram depicts the Administrator's Main Screen. The User Main
Screen does not show the F4 and F6 functions, since these are
reserved for the Administrator and can't be accessed by ordinary
Users.
2. OSD always starts in List view, with the highlight bar at the same
position it was in the last time it was closed.
3. Only the ports that have been set accessible by the Administrator for
the currently logged in User are visible (see SET ACCESSIBLE
PORTS, page 30, for details).
OSD Main Screen Headings
SN-PN This column lists the Port ID numbers (Station Number - Port Number)
for all the CPU ports on the installation. The simplest method to access
a particular computer is move the Highlight Bar to it, then press Enter.
QV If a port has selected for Quick View scanning (see Set Quick View
Ports, page 30), an arrowhead displays in this column to indicate so.
The computers that are powered on and are On Line have a Sun symbol
in this column to indicate so.
NAME If a port has been given a name (see Edit Port Names, page 29), its
name appears in this column.
F1:GOTO F3:SET F5:SKP F7:SCAN X
F2:LIST F4:ADM F6:BRC F8:LOUT z z z
ADMINISTRATOR
LIST:ALL
SN PN
QV NAME
01 14 ATEN INTL.CO. 1
01 15 ATEN INTL.CO. 2
01 16 ATEN INTL.CO. 3
02 01 FAX SERVER 1
02 02 FAX SERVER 2
02 03 WEB SERVER 1
02 04 WEB SERVER 2
02 05 MAIL SERVER 1
acs1208-1216.book Page 22 Friday, April 27, 2007 3:23 PM