ATEN ACS1208 - Manual (Page 37)

4. OSD Operation
25
F2 LIbST:
This function lets you broaden or narrow the scope of which ports the OSD
displays (lists) on the Main Screen. Many of the OSD functions only operate
on the compters currently selected for Listing on the Main Screen with this
function. The submenu choices and their meanings are given in the table
below:
* These items only show up on the Administrator's screen, since only he has
Quick View setting rights (see SET QUICK VIEW PORTS, page 30, for
details).
Move the Highlight Bar to the choice you want, then press [Enter]. An icon
appears before the choice to indicate that it is the currently selected one.
Choice Meaning
ALL Lists all of the ports on the installation.
POWERED ON Lists only the ports that have their attached computers Powered
On.
QVIEW* Lists only the ports that have been selected as Quick View Ports
(see SET ACCESSIBLE PORTS, page 30).
QVIEW +
POWERED ON* Lists only the ports that have been selected as Quick View Ports
(see SET QUICK VIEW PORTS, page 30), and that have their
attached computers Powered On.
acs1208-1216.book Page 25 Friday, April 27, 2007 3:23 PM