Osd factory default settings – ATEN ACS1208 User Manual
Page 54
Advertising
ACS1208 / ACS1216 User Manual
42
OSD Factory Default Settings
The factory default settings are as follows:
Setting
Default
OSD Hotkey
[Scroll Lock] [Scroll Lock]
Port ID Display Position
Upper Right Corner
Port ID Display Duration
3 Seconds
Port ID Display Mode
The Port Number plus the Port Name
Scan Duration
5 Seconds
Scan/Skip Mode
All
Screen Blanker
0 (Disabled)
Logout Timeout
0 (Disabled)
Beeper
Y (Activated)
Accessible Ports
F (Full) For all Users on all Ports
acs1208-1216.book Page 42 Friday, April 27, 2007 3:23 PM
Advertising
This manual is related to the following products: