ATEN ACS1208 - Manual (Page 57)

45
Troubleshooting
Symptom Possible Cause Action
Erratic behavior. Unit not receiving
enough power. Check that the Power Adapter that
was supplied with the unit is plugged
in and functioning properly.
Mouse and/or
Keyboard not
responding. Improper mouse and/
or keyboard reset. Unplug the cable(s) from the console
port(s), then plug it/them back in.
All Station IDs display
as 01. Station 1 has
suddenly lost power. Wait a few seconds for the system to
reinitialize the station sequence and
display the proper IDs.
acs1208-1216.book Page 45 Friday, April 27, 2007 3:23 PM