HP 3000 Enterprise Virtual Array - Manual (Page 131)

• 01. is the two-character backplane element number
• ec is the error code
The only corrective action available for this error is to replace the drive enclosure.
8.2.01.10 NONCRITICAL condition—Backplane NVRAM read
An invalid NVRAM read occurred and an automatic recovery process has begun. This condition report is
active for 15 seconds.
If the automatic recovery process does not correct the problem, record all six characters of the condition
report, then contact your HP authorized service representative.
8.2.01.11 NONCRITICAL condition—Backplane NVRAM write failure
The system is unable to write data to the NVRAM. This problem prevents communication between
elements in the enclosure. This condition report is active for 15 seconds.
To correct this problem, record all six characters of the condition report, then contact your HP authorized
service representative.
8.2.01.12 NONCRITICAL condition—Backplane NVRAM read failure
The system is unable to read data from the NVRAM. This problem prevents communication between
elements in the enclosure. This condition report is active for 15 seconds.
To correct this problem, record all six characters of the condition report, then contact your HP authorized
service representative.
8.2.01.13 NONCRITICAL condition—Backplane WWN is blank
The system is unable to read valid data from the NVRAM. This report is active until corrected. This
condition can result in incorrect device location data being displayed.
To correct this problem, record all six characters of the condition report, then contact your HP authorized
service representative.
I/O Module conditions
The format of an I/O module condition report is 8.7.en.ec, where:
• 8.7. is the I/O module element type number
• en. is the two-character I/O module element number (see Figure 45 )
• ec is the error code
CXO7951A
1 2
Figure 45 I/O module element numbering
1. I/O Module A (01) 2. I/O Module B (02)
Correction of an I/O module problem normally requires replacing the module. The following sections
define the I/O module problem by I/O module location.
Enterprise Virtual Array 3000/5000 user guide 131