Clearing jams from the output areas – HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 133
Advertising
ENWW
Clearing jams 129
Clearing jams from the output areas
To clear jams in the stacker or stacker/stapler
1
If the jam extends into the output bins, slowly and carefully pull the media straight out of the
MFP so that it does not tear.
2
Move the output device away from the MFP.
3
On the stacker, lift the wire on the lower bin of the device, and carefully pull out any media
from this area. On the stacker/stapler, carefully pull out any media that might be protruding
from the accumulator area.
Note
Only the stacker has the wire on the lower bin.
Advertising