Shared virtual media devices, Accessing the remote console through telnet, Redirecting bios console text through telnet – HP Lights-Out 100 Remote Management User Manual

Page 35

Advertising
background image

Using LO100 35

Shared virtual media devices

You can share a virtual media device from the Storage Devices window. Only one device may be shared

at a time.
To share a virtual media device, do the following:

1.

On the Virtual KVM menu, select Storage. The Storage Devices window appears.

2.

Click Add. A dialog box appears, enabling you to specify which device you would like to share.

3.

In the File Name field, enter either the file name or the drive you want to share. If you are sharing a
drive, enter a colon (:) after the drive letter.

4.

In the Storage Type dropdown list, select the storage type that matches the selected resource and
click Select.
You must have valid media in the drive if a removable media device type is selected. The selected
device displays in the dialog box.

5.

Select the device and click Connect. A message box appears, indicating either the device has been
successfully connected or a problem has occurred.

6.

Click OK to close the Storage Device window.

To remove a shared virtual media device, do the following:
Before removing a shared device, verify the device is safe to remove. If necessary, perform any required

steps necessary to ensure the safe removal of removable media devices on the server.

1.

On the Virtual KVM menu, select Storage. The Storage Devices window appears, displaying all

previously added devices currently available.

2.

Select the device you want to remove and click Remove. A dialog box appears, indicating that the
device has been successfully disconnected.

3.

Click OK to close the Storage Device window.

Accessing the remote console through telnet

You can access the remote console through either the BIOS console text-redirection functionality or a

Microsoft® Windows Server™ 2003 text-based console. Only one Remote Console window can be open

at a time.
To start a remote console session, press the Esc+Q keys. To end a remote console session and return to the

CLP press the Esc+( keys.

Redirecting BIOS console text through telnet

LO100 BIOS console text redirection enables you to view the entire boot process remotely and make

changes in the BIOS Setup Utility from a remote computer. This tool is valuable in troubleshooting and

managing servers remotely.
To configure the BIOS Setup Utility on the target system:

1.

Press the F10 key during POST to enter the BIOS Setup Utility.

2.

Press the right arrow (

) key to navigate to the Advanced menu.

3.

Press the down arrow (

) key to scroll down to the Console Redirection option, and then press the

Enter key.

Advertising
This manual is related to the following products: