HP Lights-Out 100 Remote Management - Manual (Page 38)

Using LO100 38
NOTE: If you encounter problems logging in to the remote console, be aware that some telnet
programs might require you to enable their
send line feed at end of line
option. If
the remote console does not respond to the Enter key, try setting this option in your telnet
program.
Hardware Inventory page
The Hardware Inventory page enables you to remotely identify the presence of processors on a target
server. To access this page from a web browser on the main menu navigation bar, click Hardware
Inventory.
User administration
The User Administration option on the main menu navigation bar enables you (if authorized) to edit the
user name and password for existing users. You cannot create a new user. The user password is stored in
nonvolatile memory and can be changed through a web browser ("
Changing user settings through a web
browser " on page 39 ) or through the CLP (" Changing user settings through the CLP " on page 39 ).
When using CLP, if you do not have the correct privileges, you are not prompted to log in with the correct
credentials. If you have insufficient access, a warning message appears. If you receive a warning
message, you must end the telnet connection and re-establish a connection. There are no restrictions when
logged in as either oemhp or administrator. User and operator accounts have the following access.
Option User Operator
Hardware Inventory Yes Yes
Virtual Power No Yes
Monitoring Sensors View only Yes
System Event Log Yes Yes
Network Settings No No
PET Configuration No No
User Configuration No No
Virtual KVM No No