HP XP7 Storage - Manual (Page 193)

Description Item
! " # $ % & ' ( ) * + , - . / ; : < > = ? @ [ \ ] ^ _ ( } ~
• To specify an IPv4 address, select IPv4 and enter 4 numbers (0-255).
For example:
XXX.XXX.XXX.XXX (X indicates a digit)
Specify only numbers. Do not specify any periods.
•
To specify an IPv6 address, select IPv6 and enter 8 hexadecimal numbers (0-FFFF).
For example:
YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY (Y indicates a hexadecimal
digit)
Enter 0 to omit a segment.
Specify a port number of the RADIUS server. Port Number
Specify the number of seconds before connection to the RADIUS server times out. Timeout
Specify the retry times when the connection to the RADIUS server fails. Number of Retries
Specify whether to use a secondary RADIUS server and a secondary LDAP server. Secondary Server
•
Enable: Uses secondary servers.
• Disable: Does not use secondary servers.
Specify a name of the secondary RADIUS server. Secondary Server - Host
Name
You can specify ASCII code characters, hyphens (-), and periods (.).
If you select Disable in Secondary Server, this item is disabled.
Specify a port number of the secondary RADIUS server. Secondary Server - Port
Number
If you select Disable in Secondary Server, this item is disabled.
Specify whether to connect an authentication server to an authorization server. External User Group
Mapping
•
Enable: Connects an authentication server to an authorization server.
•
Disable: Does not connect an authentication server to an authorization server.
Specify a certificate file. Click Browse to find the file. External User Group
Mapping - Certificate File
Name
If you select Disable in External User Group Mapping, this item is disabled.
Specify whether to search for the LDAP server using the information registered in the SRV
records in the DNS server. External User Group
Mapping - DNS Lookup
• Enable: Performs the search using information registered in the SRV records in the
DNS server.
•
Disable: Performs the search using the host name and the port number.
If you select Disable in External User Group Mapping, this item is disabled.
Specify an LDAP protocol to use. Available protocols are as follows. External User Group
Mapping - Authentication
Protocol
• LDAP over SSL/TLS
•
STARTTLS
If you select Enable in DNS Lookup, you cannot select LDAP over SSL/TLS.
If you select Disable in External User Group Mapping, this item is disabled.
Specify a host name of the LDAP server. External User Group
Mapping - Host Name
You can specify ASCII code characters, hyphens (-), and periods (.).
If you select Enable in DNS Lookup, or if you select Disable in External User Group
Mapping, this item is disabled.
Setup Server for RADIUS 193