HP XP7 Storage - Manual (Page 58)

Table 9 Roles and resource groups configured in built-in groups (continued)
Resource group Role Built-in Group
Storage Administrator (Performance Management) •
•
Storage Administrator (Local Copy)
•
Storage Administrator (Remote Copy)
•
Support Personnel
• User Maintenance
All Resource Groups
Assigned Maintenance •
Storage Administrator (View Only)
• User Maintenance
Creating a new user group
This section explains how administrators can create a user group.
Prerequisites
•
You must have Security Administrator (View & Modify) role to perform this task.
•
A user group name consists of 1 to 64 characters including alphanumeric characters (ASCII),
spaces and the following symbols:
! # $ % & ' ( ) + - . = @ [ ] ^ _ ` { } ~
•
The system can support a maximum of 256 user groups, including the built-in user groups.
Procedure 8 To create a new user group:
1. In the Administration tree select User Groups.
2. Open the Create User Groups window in one of the following ways:
•
In the User Groups tab, click Create User Groups to open the Create User Group window
•
From Settings, click User Management > Create User Groups.
3. Enter a user group name.
4. If you use an authorization server, click Check and verify that the entered user group name is
registered in the authorization server.
5. Click Next to open the Assign Roles window.
6. Select the roles to assign to the user group, and click Add.
7. Click Next to open the Assign Resource Groups window.
8. Select the resource groups to assign to the user group, and click Add. If you select a role other
than the storage administrator in the Assign Roles window, you do not need to select resource
groups because all the resource groups are assigned automatically.
9. Click Finish to finish and confirm settings.
Click Next to add another user.
10. Check the settings and enter a task name in Task Name.
11. Click Apply. The task is registered. If the Go to tasks window for status check box is checked,
the Task window opens.
Managing user accounts
This section provides instructions for the following tasks:
•
“Creating user accounts” (page 59)
•
“Changing user passwords” (page 60)
•
“Changing user permissions” (page 61)
58 Setting up and managing user accounts