Creating a new setup database – HP SAN Virtualization Services Platform User Manual
Page 19
4 To modify or create the setup database
(optional)
The Demo Mode program comes with a default setup database that represents a typical HP storage
environment. It is also possible to modify the setup database or build a new one from scratch.
The setup database is created or modified by using the
dbinit.exe
command line utility. This utility
accepts commands that create or delete components (back-end LU, HBA, hosts, VSM, and DPM).
Instead of typing one command line for each component, there is an option to have a text file with
all the commands. Run
dbinit.exe
and accept the text file with all the commands listed inside. For
a detailed description on using the
dbinit.exe
command, see “
Creating a new setup database
1.
Stop the Demo Mode program.
2.
Go to
C:\Program Files\Hewlett-Packard\SVSP\Core
and open the
dbinit.txt
file with an editor like Notepad.
HP StorageWorks SAN Virtualization Services Platform 3.0 Virtualization Services Manager Demo
Mode user guide
19