Hp top tools integration – HP NetStorage 6000 User Manual
Page 120
Integrating with Management Applications
HP Top Tools Integration
10-3
HP Top Tools Integration
Note
The integration pack must be installed on the machine running HP
TopTools.
To install HP Top Tools:
1
Close all HP TopTools program pages.
2
From the Control Panel, select Services.
a
Stop the HP TopTools Services. If this fails, set the startup mode to
Manual, reboot and go to step b.
b
Stop the IIS Admin Service. Click OK on the dialog box that lists the
WWW Publishing Services.
3
Insert the HP NetStorage 6000 CD into your CD-ROM drive.
4
Run the following program and follow the screen instructions.
\TopTools\WinNT\setup.exe
5
From the Control Panel, select Services.
a
Restart WWW Services.
b
Restart HP TopTools Services.
6
Open the HP TopTools main page.
•
If prior to running the integration pack, TopTools has already detected
the HP NetStorage 6000 device:
a
Locate the HP NetStorage 6000 device. They will be listed by the
name you have specified.
b
Right-click on the device.
c
In the pop-up menu, select Update Discovery.
•
If TopTools has not already detected the device, run Discovery from
HP TopTools by selecting Settings > Discovery user interface.
To uninstall the integration pack:
The integration pack cannot be removed.