Installing and connecting – Airfree P1000 User Manual

Page 14

Advertising
background image

Plug power cord to the nearest outlet.

Make sure the surface is dry (never place Airfree on wet floor or immerge

in water) Make sure side blue led is on.

Switch on dimmer and the anti-stress light should glow from the top lid

(1). After 10 minutes the top lid should be warm.

Place Airfree on the floor. Do not install it under furniture or shelves,

behind curtains as it will reduce air flow and Airfree efficiency in reducing

microorganisms.

Airfree P1000 was designed for rooms up to 450 sq. ft. (42m²), Airfree

P2000 Platinum was designed for rooms up to 550 sq. ft. (51m²). Airfree

P3000 Onix was designed for rooms up to 650 sq. ft. (61m²) The use of

just one Airfree in rooms larger than recommended will reduce Airfree

efficiency.

Airfree must be continuously on in the same room, 24 hours a day.

Installing and

Connecting

12

Advertising