Performing a configuration task – HP Smart Storage Administrator User Manual
Page 25
Operations 25
5.
Do one of the following:
o
Configure an additional controller. Repeat steps 3 through 5.
o
Click Exit HP SSA.
Performing a Configuration task
1.
Open HP SSA.
For more information, see "Using the HP SSA GUI (on page
)."
2.
Open the Configure panel by doing one of the following:
o
Choose a device and click Configure in the quick navigation menu.
o
Select an available device from the Home screen, and then click Configure under the available
options.
3.
Select a device from the Devices menu.
The Actions, Status Messages, and Controller Configuration Summary panels appear. The listed tasks
are available for this device in its current configuration. For more information, see "Configuration tasks
)."
4.
Click a task button.
A list of all possible options for that task appears on the right side of the screen, replacing the task list.
5.
Select the settings or configuration options for the device.
6.
Use the Next and Back buttons to navigate multiple screens of options.
7.
Click Save or OK.