HP Color LaserJet CP3520 Printer Series - Manual (Page 21)

Callout Area on the screen Information or capability that the area provides
Vivid (sRGB).This color theme is specifically for printing saturated
business graphics that you would like to have some extra “punch”. The
colors may be too saturated for photo imagery.
None.This color theme provides the user with access to the entire
devices range of colors. It enables an advanced user to do their own
color management.
Default CMYK +.A color theme by HP for CMYK source content that is
designed to provide a reasonable color rendering if the specific origin
(SWOP, EuroScale or DIC) of the CMYK content is not known.
SWOP. A color theme specifically designed to render CMYK content
according to the SWOP standard (a CMYK press Specification for Web
Offset Printing used in the USA).
Euroscale. A color theme specifically designed to render CMYK content
according to the Euroscale standard (a CMYK press specification
commonly used in Europe).
DIC (Dainippon Ink and Chemicals). A color theme specifically
designed to render CMYK content according to the DIC standard (a
CMYK press specification commonly used in Japan).
6 Calibration Information Lists the last color-plane registration (CPR) page count, the last CPR
page-count date, the last page count (in engine cycles) for DMAX/
DHALF, and the last DMAX/DHALF page-count date.
Color plane registration occurs when new print cartridges are installed
to compensate for any slight variations that might occur in cartridge
circumference.
DMAX is a density calibration of each print cartridge color at 100%
coverage; DHALF is also a density calibration of each print cartridge
color, but as a halftone instead of a full color. During halftone printing,
the dots of toner are spread out, and coverage of the toner is less than
100%.
7 Memory Lists the memory information, PCL Driver Work Space (DWS), and
resource saving information.
8 Event Log Lists the number of active entries in the Event Log, the 3 most recent
entries, and the Event Log total capacity.
9 Security Lists the status of the control-panel lock, disk write-protect options, and
direct-connect (USB or parallel) ports.
You can change the status of the Direct Connect ports on the Security
screen under the Settings tab by selecting or clearing the Disable
Direct Ports check box.
10 Paper Trays and Options Lists the size and type of media that is specified for each of the trays in
the product. If a duplexing unit or any paper-handling accessories are
installed on the product, information about those devices is also listed
here.
Table 2-2 Configuration Page (continued)
ENWW Configuration Page 11