HP ProLiant BL25p G2 Server-Blade - Manual (Page 28)

Hardware options installation 28
2. Open the release latch and prepare the hard drive for installation.
3. Install the hard drive.
4. Determine the status of the hard drive from the hot-plug hard drive LEDs.
5. Resume normal server operations.
Memory option
The server blade ships with two DIMMs installed in processor 1 memory bank A. Each processor has two
banks consisting of two DIMM slots in each bank, for a total of eight DIMM slots.
CAUTION: Use only HP DIMMs. DIMMs from other sources may adversely affect data integrity.
DIMM guidelines
Observe the following DIMM installation guidelines:
• All DIMMs must be PC5300 DDR2 667-MHz SDRAM DIMMs.