Viewing the current power scheme, Selecting a different power scheme, Customizing a power scheme – HP Mini 2102 User Manual
Page 24: Setting password protection upon exiting standby, Using external ac power
Viewing the current power scheme
▲
Click the Power Meter icon in the notification area, at the far right of the taskbar.
– or –
Select Start > Control Panel > Performance and Maintenance > Power Options.
Selecting a different power scheme
▲
Click the Power Meter icon in the notification area, at the far right of the taskbar, and then select
a power scheme from the list.
– or –
a.
Select Start > Control Panel > Performance and Maintenance > Power Options.
b.
Select a power scheme from the Power schemes list.
c.
Click OK.
Customizing a power scheme
1.
Select Start > Control Panel > Performance and Maintenance > Power Options.
2.
Select a power scheme from the Power schemes list.
3.
Modify the Plugged in and Running on batteries settings as needed.
4.
Click OK.
Setting password protection upon exiting Standby
To set the computer to prompt for a password when the computer exits Standby, follow these steps:
1.
Right-click the Power Meter icon in the notification area, and then click Adjust Power
Properties.
2.
Click the Advanced tab.
3.
Select the Prompt for password when computer resumes from standby check box.
4.
Click Apply.
Using external AC power
External AC power is supplied through an approved AC adapter.
WARNING!
To reduce potential safety issues, use only the AC adapter provided with the computer,
a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
Connect the computer to external AC power under any of the following conditions:
16
Chapter 3 Power management