Connect a new printer, Change network settings, Tips for setting up and using a networked printer – HP Photosmart 6525 e-All-in-One Printer User Manual
Page 36
Connect a new printer
To connect a new printer from the printer software
If you haven't finished connecting the printer to your computer, you need to connect it from the printer software. If
you want to connect another new printer of the same model to your computer, you don't need to install the printer
software once again.
▲
Do one of the following according to your operating system.
On Windows:
a.
From the Start menu on your computer, click All Programs, and then click HP.
b.
Click HP Photosmart 6520 series, click Printer Setup & Software, and then click Connect a new
printer
c.
Follow the instructions on the screen.
On Mac:
a.
From the Home screen, touch the Wireless icon, and then touch Settings.
b.
Follow the instructions on the screen to connect the printer.
c.
Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software
connection to this printer to wireless.
Change network settings
If you want to change the wireless settings that you previously configured to a network, you need to run the
Wireless Setup Wizard from the printer display.
To run Wireless Setup Wizard to change network settings
1.
From the Home screen, touch the Wireless icon, and then touch Settings.
2.
Touch Wireless Setup Wizard.
3.
Follow the instructions on the screen to change the network settings.
Tips for setting up and using a networked printer
Use the following tips to set up and use a networked printer:
•
When setting up the wireless networked printer, make sure your wireless router is powered on. The printer
searches for wireless routers, then lists the detected network names on the display.
•
To verify the wireless connection, touch the Wireless icon on the control panel. If it shows Wireless Off,
touch Turn On.
•
If your computer is connected to a Virtual Private Network (VPN), you need to disconnect from the VPN
before you can access any other device on your network, including the printer.
•
Learn more about configuring your network and the printer for wireless printing.
.
•
Learn how to find your network security settings.
.
•
Learn about the Network Diagnostic Utility (Windows only) and other troubleshooting tips.
•
Learn how to change from a USB to wireless connection.
.
•
Learn how to work with your firewall and anti-virus programs during printer setup.
.
Chapter 8
34
Connectivity