HP ProLiant DL320e Gen8 v2-Server - Manual (Page 64)

Software and configuration utilities 64
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or in
both modes.
Software or configuration utility Server mode
HP iLO (on page 64 ) Online and Offline
Active Health System (on page 65 ) Online and Offline
Integrated Management Log (on page 66 ) Online and Offline
Intelligent Provisioning (on page 66 ) Offline
HP Insight Diagnostics (on page 67 ) Online and Offline
HP Insight Remote Support software (on page 68 ) Online
HP Insight Online (on page 68 ) Online
Erase Utility (on page 67 ) Offline
Scripting Toolkit (on page 68 ) Online
HP Service Pack for ProLiant (on page 68 ) Online and Offline
HP Smart Update Manager (on page 69 ) Online and Offline
HP ROM-Based Setup Utility (on page 69 ) Offline
HP Smart Storage Administrator (on page 71 ) Online and Offline
Option ROM Configuration for Arrays (on page 71 ) Offline
ROMPaq utility (on page 72 ) Offline
HP product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (
http://www.hp.com/go/productbulletin ).
HP iLO Management Engine
The HP iLO Management Engine is a set of embedded management features supporting the complete
lifecycle of the server, from initial deployment through ongoing management.
HP iLO
The iLO 4 subsystem is a standard component of selected HP ProLiant servers that simplifies initial server
setup, server health monitoring, power and thermal optimization, and remote server administration. The iLO
4 subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface. This
design makes iLO 4 independent of the host server and its operating system.