HP Optical Jukeboxes - Manual (Page 56)

3-18 Chapter 3
Operating the Jukebox
Using the Front Panel Features
17 Set a new
security code. 0-0-0 Any three-digit number.
Requires entering the current security
code.
18 Used by service personnel only. Changing this configuration may result in
an inoperable jukebox.
20 Set disk security
operation after a
power failure Off On - maintains the status of config. 15
upon power cycle or power failure.
Off - config. 15 is not maintained through
a power cycle or power failure.
Requires entering the current security
code.
21-26 Used by service personnel only. Changing these configurations may result
in an inoperable jukebox.
27 Reporting
recovered errors
to the host
computer
Off On - reports the SCSI- level error to the
host computer.
Off - no reports of SCSI- level errors to the
host computer.
28-30 Not used
Table 3-1 Configurations
Number Function Default Settings