HP XP P9500 Storage - Manual (Page 40)

Characters Values Description Parameter Column
16 hexadecimal
digits 0000000000000000
to
FFFFFFFFFFFFFFFF WWN of the alternate path. WWN C
Third Layer: Information about LDEVs to be created in an external volume.
N/A N/A Identifier + A
+ B
2 hexadecimal
digits or less 00 to 01 LDKC number LDKC C
2 hexadecimal
digits or less 00 to FE CU number CU D
2 hexadecimal
digits or less 00 to FF LDEV number. Specify a number that is not currently
assigned. LDEV numbers may be assigned in another LDEV E
emulation group (grouped by 32 LDEV numbers), in which
case they cannot be used.
For more information about emulation groups, see the HP
P9000 Provisioning for Open Systems User Guide or the
HP P9000 Provisioning for Mainframe Systems User
Guide.
Check to see if a number is assigned. To do this, open
RWC and check the LDEV tab on the Basic Information
Display dialog box (File > Go > Basic Information).
10 decimal digits
or less 1 to
8589934592 Capacity of the LDEV in blocks.
For more information on how to calculate LDEV size in
blocks and emulation considerations, see
“Specifying
LDEV Capacity” (page 41) .
Capacity F
4 hexadecimal
digits or less 0004 to FFFE SSID assigned to the range of the LDEV numbers. Use the
SSID shown in the output file from the SSID G
ExternalStorage_Get_def.spd spreadsheet for the
range. If you create an LDEV that does not have any SSID,
specify an SSID that is not written in the output file.
For more information on SSIDs, see the HP P9000
Provisioning for Open Systems User Guide or the HP
P9000 Provisioning for Mainframe Systems User Guide.
Example of mapping external volumes with multiple LDEVs
#!Version 06_01_00,CLI_ExternalStorage,VolumeOperationFibre,;
[SerialNumber]
65536,;
[AddVolumeSetting]
1,1A,60060E8004F81370,0001,E16384-4095,Normal,00,OPEN-V,Enable,Disable,;
+,1B,60060E8004F81371,;
+,+,00,00,00,96000,0004,;
+,+,00,01,00,96000,0005,;
+,+,00,02,00,96000,0006,;
40 External Storage operations