Running the server processes on the nonstop system, Figure 3-27, Obey_go – HP NonStop G-Series User Manual
Page 59
Configuring SMM on the NonStop System
Silo Media Manager Installation and User’s Guide — 541559-001
3- 27
Running the Server Processes on the NonStop
System
3 Configuring SMM on the NonStop System
Running the Server Processes on the NonStop System
Once SMM has been configured on the HP NonStop S-series system, the TCP/IP
process name PARAM needs to be set and the process executed before connecting to
the robot using the GUI.
1. Create an obey file to run the SMM server as shown in
.
2. Type “OBEY STATUS” to see if the SMM processes have started.
shows the files and processes that are running.
3. Press Enter.
Note.
Use the appropriate home terminal process for your system. Server files and client files need to be run by
using SUPER.GROUP access.
Figure 3-27. OBEY_GO