HP ProLiant MicroServer Gen8 User Manual
Page 28
Setup 28
WARNING:
To reduce the risk of electric shock or damage to the equipment:
•
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
•
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
•
Unplug the power cord from the power supply to disconnect power to the equipment.
•
Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the storage system.
1.
Connect the power cord to the server.
2.
Open the power cord retaining clip, and then thread the power cord through the strain relief clip.
3.
To secure the power cord, snap the clip into place.
4.
Connect the power cord to the AC power source.
The server automatically turns on after the power cord is connected.