HP Photosmart D7560 Printer - Manual (Page 19)

5. When prompted, touch Yes to confirm your selection.
The Preferences menu reappears.
6. Touch Set Country/Region.
7. Touch the down arrow to scroll through the countries/regions. When the country/
region you want to use appears, touch that country/region.
8. When prompted, touch Yes to confirm your selection.
Set the default paper tray for PictBridge/DPOF/UPnP printing
You can set the default paper tray to use when you print photos from a Pictbridge device,
DPOF file, or a Universal Plug and Play (UPnP) device. This setting only applies to print
jobs where the paper size settings are not specified on the Pictbridge device, DPOF file,
or the UPnP device.
To set the default paper tray
1. Touch the Setup icon.
2. Touch Preferences.
3. Touch Device-Printer Tray Select.
4. Touch Main Tray or Photo Tray.
Enable faster browsing of photos
You can set up the HP Photosmart to enable faster photo browsing by writing small
thumbnails to the memory card. The thumbnails take up a relatively small amount of
space and are used to speed up the browsing performance of photos on the card.
NOTE: This feature is on by default.
To turn faster browsing on or off
1. Touch the Setup icon.
2. Touch Preferences.
3. Touch the down arrow to scroll through the options, and then touch Enable Faster
Browsing.
4. Touch On or Off.
Set the energy save mode
When you turn off the HP Photosmart, it goes into Energy Save mode by default. This
makes the product more energy efficient, but also means it can take longer than expected
to turn the product on. Additionally, when turned off in Energy Save mode, the
Chapter 4
16 Finish setting up the HP Photosmart
Finish set
up