Installing the fold-chutes – HP LaserJet Print to Mail Accessories User Manual
Page 15
EN
Installing the accessory 13
Installing the fold-chutes
Note
Fold-stop settings (for different paper sizes and different folds) can only
be changed when the fold-chutes are removed from the accessory. For
information about changing fold-stop settings, see “Setting fold-stops”
in Chapter 3—Using the accessory.
Figure 8.
Installing fold-chutes
1
Insert the upper fold-chute (the smaller fold-chute with numerical
stop identifiers) into the chute guide with the labels facing up.
Note
The top cover must be closed to install or remove the upper fold-chute.
2
Gently push the fold-chute into the guide until the thumb tabs lock
with an audible “click.” When locked in place, fold-chutes cannot
be pulled out without pressing the thumb tabs.
3
Install the lower fold-chute (the larger fold-chute with alphabetic
stop identifiers) in the same manner, with the labels facing up.
Thumb
tab