HP StoreEver ESL G3 Tape Libraries - Manual (Page 33)

URI: aml/partition/{name}/mode
Method GET
Description Retrieve the current mode (Online/Offline) of the partition
whose name is provided by the URI path template name.
A single string value will be returned and the possible values
are:
•
1 (online)
•
2 (offline)
Media Type Request: N/A
Response: text/plain and application/json
Parameters N/A
Response Code 200
Example: Response Data 2
Method PUT
Description Change the partition mode, 1 (Online) or 2 (Offline)
This option only applies to standard partitions.
Media Type Request: text/plain and application/json
Response: application/xml and application/json
Parameters N/A
Response Code 200, 401, 403, 404, and 500
Example: Text Request Data 2
XML Response See “URI: aml/partition/{name}/mode” (page 80) for the
XML Response code.
URI: aml/partition/{name}/name
Method GET
Description Retrieve the current name of the partition whose name is
provided by the URI path template name. The return name
should be the same as the name template.
The only purpose of the method is for
completeness/consistency of the Web Service interface.
Media Type Request: N/A
Response: application/xml and application/json
Parameters N/A
Response Code 200, 401, 404, and 500
Example: Response Data test partition
Method PUT
Description Change the partitions name.
NOTE: The partition mode must change before a
connected host will see these changes.
Media Type Request: application/xml and application/json
URI: aml/partition/{name}/mode 33