HP TopTools for Hubs and Switches - Manual (Page 187)

Setting Up Security for a Device
Hub Port Security
14-7
Figure 14-3. Hub Port Security Page
Address Selection
Address Selection refers to how the authorized address for a port is
discovered. The three settings are explained in the table.
Table 14-2. How Authorized Addresses are Discovered
To set the Address Selection:
1. Click on the Set Security Policy for Selected Ports button.
2. Select a setting from the Address Selection drop down list.
3. Click on Apply Settings.
Setting Description
Continuous The device learns the address of the device attached to the port and
makes it the authorized MAC address. If a different device is later
attached to the port, the new address is learned and becomes the
authorized address.
First Heard The device learns the address of the device attached to the port and
makes it the authorized MAC address. If a different device is later
attached to the port, the new address is registered as an “intruder
address”; a security violation has occurred and the port is
automatically disabled.
Assigned Enter the address of the device that is authorized to be attached to the
port. If a different device is attached to the port, the new address is
registered as an “intruder address”; a security violation has occurred
and the port is disabled.