Hp insight diagnostics, Hp insight diagnostics survey functionality, Erase utility – HP ProLiant BL660c Gen8 Server Blade User Manual
Page 54
Software and configuration utilities 54
see the Resources tab on the HP website
For consolidated drive and firmware
update packages, see the HP Systems and Server Software Management page on the HP website
HP Insight Diagnostics
HP Insight Diagnostics is a proactive server blade management tool, available in both offline and online
versions, that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify
server blade installations, troubleshoot problems, and perform repair validation.
HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS
is not running. To run this utility, boot the server blade using Intelligent Provisioning (on page
HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and
other related data needed for effective server blade management. Available in Microsoft Windows and
Linux versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the HP website
. HP
Insight Diagnostics Online Edition is also available in the SPP ("
" on page
HP Insight Diagnostics survey functionality
HP Insight Diagnostics (on page
) provides survey functionality that gathers critical hardware and software
information on ProLiant server blades.
This functionality supports operating systems that are supported by the server blade. For operating systems
supported by the server blade, see the HP website
If a significant change occurs between data-gathering intervals, the survey function marks the previous
information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted HP Insight Diagnostics installation,
or it can be installed through the SPP ("
" on page
Erase Utility
CAUTION:
Perform a backup before running the Erase Utility. The utility sets the system to its
original factory state, deletes the current hardware configuration information, including array
setup and disk partitioning, and erases all connected hard drives completely. Before using this
utility, see the instructions in the HP Intelligent Provisioning User Guide.
Use the Erase Utility to erase drives and Active Health System logs, and to reset RBSU settings. Run the Erase
Utility if you must erase the system for the following reasons:
•
You want to install a new operating system on a server blade with an existing operating system.
•
You encounter an error when completing the steps of a factory-installed operating system installation.
To access the Erase Utility, click the Perform Maintenance icon from the Intelligent Provisioning home screen,
and then select Erase.
For more information about the Erase Utility, see the HP Intelligent Provisioning User Guide on the HP website