Ethernet lights – HP Deskjet 6943 Printer User Manual
Page 26
Previous installations
If the printer software was previously installed on the computer, you must use the printer
software CD to install an Ethernet version of the printer driver on the computer. Follow
the steps below. The printer software installation wizard guides you through the
installation process.
Caution
It is recommended that the printer and the computers that use it be on
the same subnet. Printer installation across subnets can be problematic
depending on the type of router used.
Software installation
Follow these steps to install the printer software on the computer:
1.
Close all applications running on the computer.
2.
Insert the printer software CD in the computer's CD-ROM drive.
3.
Follow the onscreen instructions. On the Connection Type screen, select Wired
Network.
4.
After the installation has completed, follow the onscreen instructions to print a test
page.
Ethernet lights
The printer's Ethernet lights indicate the status of the printer's Ethernet connection.
Link light
The Link light is solid when the printer is connected to an Ethernet network and powered
on.
State of the Link light State of the printer
On
Connected to an Ethernet network and powered on.
Off
Not connected to an Ethernet network or powered off.
Activity light
The Activity light flashes when the printer is receiving or transmitting data over the
Ethernet connection.
Chapter 4
24
HP Deskjet 6940 series