HP Netserver L Server series - Manual (Page 46)

Chapter 5 Installing Additional Boards
40
Lift Cage by Fan and Back Edge
Figure 5-3. Removing the PCI Card Cage
8. Install the PCI card:
a. Use a Phillips screwdriver to remove the slot cover. See Figure 5-4.
b. Slide the PCI card into the PCI slot. See Figure 5-5.
NOTE Slot 1 does not support the HP NetRAID-4M PCI board.
Avoid using slot 1 for full-length cards. Slots 2 and 3 may
be used for any card.