Iscsi initiator properties, Host settings – HP StorageWorks 1000i Virtual Library System User Manual
Page 46
Advertising
Figure 33 iSCSI Initiator Properties
3.
Copy the entire Initiator Node Name. Do not modify the name.
NOTE:
Be sure to copy the entire Initiator Node Name. If part of the name is missing, the device will not
be recognized.
Close the iSCSI Initiator Settings window by clicking its OK button.
4.
In the Create Virtual Device pane of the GUI, scroll down until you see Host Settings (
), then
paste the Initiator Node Name into the iSCSI Name box in Host Settings as shown in
Figure 34 Host Settings
46
Configuring the VLS1000i
Advertising