HP Deskjet 5850 Color Inkjet Printer - Manual (Page 30)

recognized by the network.
●
Encryption required: The network to which
the printer is trying to gain access requires
encryption. The printer's encryption settings
must match those of the network.
communication mode
The communication mode to which the printer is
configured.
●
Infrastructure
●
Ad hoc
Network Name (SSID) The SSID setting to which the printer is set.
Signal Strength
The strength of the 802.11 radio signal the printer is
receiving:
●
1 through 5: 5 indicates an excellent signal; 1
indicates a poor signal.
●
No Signal: The printer is receiving no radio
signal. For troubleshooting, click
here .
●
Not applicable: The printer is set to ad hoc
communication mode or the wireless network is
disabled.
●
[blank]: The printer is scanning for an SSID .
Access Point HW address
The MAC address of the Wireless Access Point (WAP)
for the printer's network. This setting applies only to
infrastructure networks. Not applicable means that
the printer is set to ad hoc communication mode.