HP Deskjet 460cb Mobile Printer - Manual (Page 85)

Resolving printing problems 85
Ink is smearing
Check the print settings
• When you print documents that use more ink, allow more time for the pages to dry before handling or
stacking the printouts. This is especially true for transparencies and photo papers. In the printer driver,
select Best mode, and also increase the ink drying time and reduce the ink saturation using the
ink volume control under the advanced color features (Windows) or ink features (Mac OS). However,
note that decreasing ink saturation might give printouts a “washed-out” quality.
• Color documents that have rich, blended colors can wrinkle or smear when printed using Best mode.
Try using Normal or Fast Normal mode to reduce ink, or use HP Premium Paper designed for printing
vivid color documents.
• Check that the correct media type is selected in the printer driver.
• For Windows, try adjusting the Saturation, Brightness and Color Tone in the printer driver. For the
Mac OS, adjust these settings from the Color Options panel under Paper Type/Quality, in the Print
dialog box.
Check the ink service module
• Remove the ink service module and check to see if it is full. If it is not full, reinstall the module. If it is
full, replace it with a new one. For information on removing and replacing the ink service module, see
Replacing the ink service module .
Check the media size and type
• Do not allow the printer to print media that is smaller than the print job. If you are doing borderless
printing, make sure the correct media size is loaded. If you are using the incorrect size, ink smears
might appear on the bottom of subsequent pages.
• Some types of media do not accept ink well; ink will dry more slowly and smearing might occur. See
Selecting print media .
Ink is not filling the text or graphics completely
Check the print cartridges
Check to make sure that both print cartridges are installed and functioning correctly. Print cartridges might
need to be cleaned. See
Cleaning the print cartridges . Print cartridges might have run out of ink. Replace
any empty cartridge. Try removing and reinstalling the cartridges, making sure they snap firmly into place.
See
Replacing the print cartridges .
Check the media type
Some media types are not suitable for use with the printer. See Selecting print media .