How to clean troubleshooting, Parts identification – Aroma AWK-208BR User Manual

Page 5

Advertising
background image

REMOVING MINERAL DEPOSITS:

Hard water can leave mineral deposits that create scale build-up on the

interior of the kettle. To avoid this build-up, it is best to always use distilled

water. If mineral deposits do occur, follow the instructions below to

remove them.

1. Fill the kettle halfway with water and bring to a boil.

2. Add one cup of white vinegar. Let the mixture soak overnight or for at

least 6 hours.

3. Empty the mixture and rinse out the kettle.

4. Refill the kettle with water only. Bring to a boil and empty again.

5. Repeat as needed.

HOW TO CLEAN

TROUBLESHOOTING

PROBLEM

SOLUTION

The kettle and

indicator light

do not work

when the power

switch is up.

•Make sure the kettle is seated properly on the power

base and that the base is connected to a functioning

electrical outlet.

•If the problem persists, please contact our customer

service department toll-free at (800) 276-6286 or

through email at [email protected].

The water is

boiling, but the

power switch

and indicator

light do not turn

off.

•The auto-shut off function will not operate properly if

the lid is not completely closed. Allow kettle to cool,

then check to see that the the lid is properly locked

into place.

•If the problem persists, please contact our customer

service department toll-free at (800) 276-6286 or

through email at [email protected].

The power

switch won't

depress and the

kettle will not

turn on.

•Make sure that the kettle is seated properly on the

power base and that the base is connected to a

functioning electrical outlet.

•Water or debris on the bottom of the kettle or on the

power base may interfere with the functioning of the

kettle. Be sure that the base of the kettle and the

power base are dry and free of debris.

•If the problem persists, please contact our customer

service department toll-free at (800) 276-6286 or

through email at [email protected].

6

PARTS IDENTIFICATION

1. Kettle Lid Handle

2. Kettle Lid

3. Easy-Grip Handle

4. Kettle Body

5. Power Switch

6. Indicator Light

7. Power Base

8. Spout

2

7

8

6

3

1

3

4

5

Advertising
This manual is related to the following products: